Login

Odi · (This post was last modified: 08-11-2021, 03:37 AM by Odi.)

I purchased this Akeeyo AKY-958 Motorcycle DVR in January 2020 and finally installed it over the weekend: smile.amazon.com/dp/B07TQ5ZXZD

I mounted the rear camera in the “backup light spot” by removing the camera screw cap (that holds the ring mount in place) and using several layers of electrical tape to have it sit in the backup light rubber gasket.

[Image: C733-E7-EE-A9-CC-4112-B48-D-0-FB54-EE2-F75-F.jpg]

[Image: 7-D4-D9713-BC1-F-46-B0-A197-43064-F1-E5-C48.jpg]

These are the backup lights I had purchased in Sept 2020 and used the rubber gasket of: smile.amazon.com/dp/B07DKXMTFF

I simply attached the front camera with some binder clips and a thin rubber pad to protect the paint.

[Image: 40-F4-F4-E7-5113-4099-B973-B0-FD9-C225519.jpg]

I mounted the display to the handle bar

[Image: A182-EAC7-C86-D-48-C1-A8-C0-331407-C6-FCE1.jpg]

The greatest part is the screen saver is a clock!

Login
Username:
Password:	Lost Password?
	Remember me